:: Welcome to ADALET :: <products>

Welcome to Adalet (A Scott Fetzer Company)

[ buy electrical enclosures online ]

products

NEMA TYPE 4

APPLICATION
Adalet's NEMA 4 enclosures are used indoors and outdoors to house such items as electrical/ electronic controls, instrumentation systems, and pneumatic, hydraulic and machine tool controls. These enclosures are designed to provide protection against dust, dirt, oil and water. They are suitable for use in areas such as dairies, breweries and similar environments where they are subject to frequent high pressure hosing and generally wet conditions.

CONSTRUCTION
Adalet's NEMA 4 enclosures are made from 14 ga. cold rolled steel and have continuously welded seams ground to a smooth finish. They have a folded lip around the door opening to provide complete and maximum gasket contact, and to prevent liquids from dripping into the enclosure when the door is open. Each enclosure comes complete with 3/8 collar studs (for mounting optional panels) and 1/4-20 grounding studs. Each enclosure door is equipped with neoprene gasket, a removable print pocket, padlocking hasp, 1/4-20 grounding studs, and stainless steel door clamping hardware on three sides. The door is easily removed by pulling the pin on the continuous stainless steel piano hinge. Large enclosures come complete with additional panel mounting studs and maintain a rigid construction through the use of door and body stiffeners. There are no knockouts or holes in the door or body.

STYLES

Wall-Mounted Single Door Enclosure

SIZES

Adalet NEMA TYPE 4 enclosures range in size from:
16 " X 12 " X 06" to 60 " X 36 " X 16 "

UPCOMING EVENTS

Offshore Technology Conference 2008
May 5 - 8
Reliant Center
Houston, TX...

ISA Expo 2008
October 14 - 16
Reliant Center
Houst...