:: Welcome to ADALET :: <products>

Welcome to Adalet (A Scott Fetzer Company)

[ buy electrical enclosures online ]

products

NEMA TYPE 12

APPLICATION
Adalet's NEMA 12 enclosures are designed for indoor use to provide a degree of protection against dust and dirt, and spraying of water, oil or coolant. They are used to house electronic/electrical controls, instrumentation systems, and pneumatic, hydraulic, and machine tool controls.

CONSTRUCTION
Adalet's NEMA 12 enclosures are made from 14 ga. cold rolled steel and have continuously welded seams ground to a smooth finish. The NEMA 12 enclosure has a folded lip around the door opening to provide complete and maximum gasket contact, and to prevent liquids from dripping into the enclosure when the door is open. Enclosures come complete with 3/8 collar studs (for mounting optional panels) and four wall mounting back brackets. The enclosure door is equipped with oil resistant neoprene gasket, a removable print pocket, 1/4-20 grounding stud, padlocking hasp and screw down latches.

The door is easily removed by pulling the pin on the continuous piano hinge. Large NEMA 12 enclosures come complete with additional mounting studs and maintain a rigid construction through the use of door and body stiffeners. There are no knockouts or holes in the body or door.

STYLES

Wall-Mounted Single Door Enclosure

SIZES

Adalet NEMA TYPE12 enclosures range in size from:
16 " X 12" X 64" to 72 " X 30 " X 24"

UPCOMING EVENTS

Offshore Technology Conference 2008
May 5 - 8
Reliant Center
Houston, TX...

ISA Expo 2008
October 14 - 16
Reliant Center
Houst...